Circuit Board

Circuit Board

Removing






- Remove the cooler. Refer to => [ Cooler J698 ] Cooler J698.

- Disconnect the electrical connectors - 1 through 7 -.

- Disconnect electrical harness connector - 8 -.

- Remove the bolts - arrows -.

- Remove the circuit board - 9 -.

Installing

Installation is reverse of removal, noting the following:

- Make sure the spacer bushings - 10 - are mounting the base plate.

- Install the cooler. Refer to => [ Installing ] Cooler J698.

Tightening specifications, refer to => [ Cooler Overview ] Cooler Overview.