Connector Mount

Connector Mount

Removing






- Remove the cooler. Refer to => [ Cooler J698 ] Cooler J698.

- Disconnect the electrical connectors - 2 - and - 3 -.

• Ignore - item 1 - and the - 4 through 8 -.

- Remove the bolts - arrows -.

- Remove the circuit board - 9 - and spacer bushings - 10 - and move them to the side.

- Remove the bolts - arrows -.






- Disconnect the connector - 1 - for the voltage supply.

Installing

Installation is reverse of removal, noting the following:

- Install the cooler. Refer to => [ Installing ] Cooler J698.

Tightening specifications, refer to => [ Cooler Overview ] Cooler Overview.