Cooler Compressor Switch

Cooler Compressor Switch

Removing






- Remove the cooler. Refer to=> [ Cooler J698 ] Cooler J698.

- Free up the wiring harness around the switch.

- Disconnect the connectors - 1, 4 and 5 - on the switch.

- Squeeze the clips - arrows A - and remove the switch - 3 - upward from the cooler - 2 - - arrow B -.

Installing

Installation is reverse of removal, noting the following:

- Install the cooler. Refer to => [ Installing ] Cooler J698.

Tightening specifications, refer to => [ Cooler Overview ] Cooler Overview.