Cooler Cover

Cooler Cover

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Fold the center armrest - 3 - upward.

- Open the cover - 1 - above the cupholders.

- Remove the trim - 2 - using the (3409).

- Pry the caps - 4 - off the screws.






- Remove screws - 1, 3, 5 -.

Danger of damaging the center armrest.

• Cover the underside of the center armrest to prevent scratches.

- Pry the cooler (J698) - item 2 - out of the multi-box using the (3409) - arrows -.








Danger of damaging the compressor, the refrigerant lines and the cooler.

• Do not bend the coolant lines and hoses between the compressor and cooler.

- Carefully push the cooler to the right until the hinge bolts are accessible.

- Remove the left and right hinge bolts - 2 - with needle nose pliers - 3 - - arrow -.

- Remove the cover - 1 - from the cooler - 4 -.

Installing

Install in reverse order of removal.

Tightening specifications, refer to => [ Cooler Overview ] Cooler Overview.