Cooler Overview

Cooler Overview






1 Cooler (J698)

• Unit with compressor.

• Removing and installing, refer to => [ Cooler J698 ] Cooler J698.

2 Bolt

• 5 Nm

• Quantity: 2

3 Edge Protection

• Quantity: 2

4 Compressor

• Unit with cooler (J698).

• Removing and installing, refer to => [ Cooler J698 ] Cooler J698.

5 Spacer Sleeve

• Quantity: 4

• Clipped into the base plate.

6 Fan

• Removing and installing, refer to => [ Fan ] Fan.

7 Bolt

• 2 Nm

• Quantity: 4

8 Connectors

• To the cooler compressor control module.

9 Connector

• Removing and installing, refer to => [ Connector Mount ] Connector Mount.

10 Bolt

• 2 Nm

• Quantity: 2

11 Circuit Board

• Removing and installing, refer to => [ Circuit Board ] Circuit Board.

12 Bolt

• 0.9 Nm

• Quantity: 4

13 Retaining Bolt

14 Cover

• For cooler (J698).

• Removing and installing, refer to => [ Cooler Cover ] Cooler Cover.

15 Seal

• Replace if damaged.

16 Cooler Compressor Control Module

• Removing and installing, refer to => [ Cooler Compressor Control Module ] Cooler Compressor Control Module.

17 Switch

• For cooler compressor.

• Removing and installing, refer to => [ Cooler Compressor Switch ] Cooler Compressor Switch.

18 Cover

• Quantity: 2

19 Bolt

• 2.5 Nm

• Quantity: 2

20 Hinge pin

• For the cooler (J698) cover.

• Removing and installing, refer to => [ Cooler Cover ] Cooler Cover.

21 Light Emitting Diode (LED)

• For cooling display

• Removing and installing, refer to => [ Cooling LED ] Cooling LED.

22 Wiring Harness

• Cannot be replaced separately.

23 Bolt

• 1.5 Nm

• Quantity: 2

24 Clips

• Quantity: 2

• For securing the multi-box mount.