Side Window Trim Molding

Side Window Trim Molding






1 Upper Trim

• It is not possible to remove without destroying.

• If removal and installation is done with window installed, tape off area to body with adhesive tape to protect against paint damage.

• Removal:

- Remove trim from guide channel.

Installing:

- For easier installation, coat guide channel with some soap suds.

- Align trim panel with window and press it into guide channel in stages.

2 Side Window

3 Adhesive Sealing Material

4 Clip

Vehicles With Gloss Package






1 Side Window

2 Trim Panel Clip

• quantity: 7 pressed into molding.

3 Trim Molding Clip

• Quantity: 7 pressed into molding.

4 Upper Trim

• Before removal, side panel trim molding - 5 - and trim molding - 4 - removed.

• To remove, unclip in stages from clips.

5 Decorative Trim Strip

• Before removal, side panel trim molding removed.

• To remove, unclip in stages from clips.

6 Side Panel Trim Molding

7 C-pillar Trim

• To remove, slide forward out of side window.

8 Clip

Side Panel Trim Molding, Removing






- Before removing trim molding, adhere side panel in this area with adhesive tape.

- Remove the trim molding - 1 - from C-pillar beginning at clips - 3 - below side window molding - 2 -.

Trim Molding Clips






- Press clips as shown into molding on side window.