Center Instrument Panel Vent

Center Instrument Panel Vent

Special tools, testers and auxiliary items required

• Hook (3438) (quantity: 2)

Removing






• The center instrument panel vent has a hole on the left and right - arrow A - to engage the (3438).

- Position the center instrument panel vent blades so that they are horizontal.

- Carefully remove center instrument panel vent - 1 - from the installation opening - arrow B - with the (3438) on both sides.

- Disconnect electrical connector.

Installing

Install in reverse order of removal. Note the following:

- Press the center instrument panel vent until the locking tabs engage in the installation opening.