Mounting Piece

Mounting Piece

Removing


Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .

- Remove the 2nd row bench seat. Refer to => [ 2nd Row, 3 Seater Overview ] 2nd Row, 3 Seater Overview.

- Remove rear floor covering - 3 -. Refer to => [ Floor Covering Overview ] Floor Covering Overview.






- Remove the bolts - 1 -.

- Remove mounting piece - 2 -.

Installing


Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .

• The screws are micro-encapsulated and must be replaced after each loosening.

• Before installing the new bolts, the threads of the corresponding nuts must be cleaned.

Install in reverse order of removal.

Tightening specification, refer to => [ 2nd Row For 5 and 7 Seats, Bracket and Mount Overview ] 2nd Row For 5 and 7 Seats, Bracket and Mount Overview.