Seat Height Adjustment Handle

Seat Height Adjustment Handle

Removing

• To remove, cover - 3 - on rear side of seat height adjuster handle - 1 - must be unclipped. Bring seat height adjuster handle into highest position and then pull it slightly away from seat trim.






- Carefully pry cover - 3 - off with a small screwdriver, beginning at cut-out - arrow A -.

- Then carefully pry cover - 3 - in area between - arrow B - and - arrow C - from seat height adjuster handle - 1 -.

2 - Guide

- Remove seat height adjuster handle - 1 -.

Installation

• Do not unclip seat height adjuster handle - 1 - with cover - 2 - before installing on seat under any circumstances.

- Carry out pre-assembly of seat height adjuster handle - 1 - and cover - 2 -.






- When pre-assembling, maintain a gap dimension - a - of 2 to 3 mm.

- Place the pre-assembled seat height adjuster handle on the bracket on the front seat.

- Clip in seat height adjuster handle with cover.