Diagram 6/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance Regulation Control Module, Distance Regulation Sensor Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview Of Relay

J428 - Distance Regulation Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

SB2 - Fuse 2 (on fuse panel B) Overview Of Fuses

SB6 - Fuse 6 (on fuse panel B) Overview Of Fuses

T8c - 8-Pin Connector, black, in engine compartment, front left

T20 - 20-Pin Connector, black, on data bus on board diagnostic interface

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

Z47 - Distance Regulation Sensor Heater

(368) - Ground Connection 3 (in main wiring harness)

(640) - Ground Connection (in engine compartment, left) Ground Locations

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

(C45) - Plus Connection 1 (15) (in front wiring harness)

• - CAN-Bus (data wire)

* - Relay and fuse carrier below driver's seat

♦ - Through May 2007

♦♦ - from June 2007

# - Through May 2008

## - from June 2008