Low Beam Bulb

Low Beam Bulb

• Adjust the headlamps after performing any work that could have affected their adjustment => [ Headlamps, Adjusting ] Headlamps, Adjusting.

Removing






- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

- Remove headlamp, refer to => [ Headlamps ] Headlamps.

- Release locking slide - 2 - in - direction of arrow - and remove housing cover - 1 - from headlamp housing.

- Remove bulb - 1 - from spring clips - arrows -.






- Disconnect electrical harness connector - 2 - at bulb.

Installing

Install in reverse order of removal, observing the following:

- Insert bulb in housing, taking care not to touch glass bulb with bare hands.

- Press bulb in housing over spring clamp resistance.

- Connect harness connector.

- Close the housing lid.

- Secure housing cover using locking slide.

- Install headlamp, refer to => [ Installing ] Headlamps.

- Adjust headlamps after installing, refer to => [ Headlamps, Adjusting ] Headlamps, Adjusting.