Rear Axle Toe, Adjusting

Rear Axle Toe, Adjusting

- Remove connector nut - 2 - and install new nut as far as stop.






- Adjust toe by rotating eccentric bolt.

• The maximum adjustment range is 90° to left or right of center position.

• The geometric drive axle is automatically changed when individual toe settings are changed.

- Tighten nut - 2 - - item 11 - => [ (Item 11) Self-Locking Nut ] Rear Axle Overview.

- After nut - 2 - has been tightened, check toe value again.