Diagram 3/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Engine Coolant Temperature (ECT) Sensor, Fuel Pressure Sensor, Intake Manifold Runner Position Sensor, Throttle Valve Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G186 - Throttle Drive (for Electronic Power Control (EPC) 4.2L Gasoline, BAR Overview

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) 4.2L Gasoline, BAR Overview

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) 4.2L Gasoline, BAR Overview

G247 - Fuel Pressure Sensor Locations

G336 - Intake Manifold Runner Position Sensor 4.2L Gasoline, BAR Overview

G512 - Intake Manifold Runner Position Sensor 2 4.2L Gasoline, BAR Overview

J338 - Throttle Valve Control Module Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

T14m - 14-Pin Connector, black, in engine compartment, Bank 1

T60 - 60-Pin Connector, black, on engine control module (ECM)

(327) - Sensor Ground Connection (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

* - Phased-in modification

# - Through May 2006

## - from June 2006

Previous Diagram 3/11 (Tracks 127-140)

Next Diagram 3/13 (Tracks 155-168)