Diagram 3/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Brake Booster Pressure Sensor, Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Fuel Metering Valve, Secondary Air Injection (AIR) Solenoid Valve, Secondary Air Injection (AIR) Sensor 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G294 - Brake Booster Pressure Sensor Antilock Brake System Component Overview

G609 - Secondary Air Injection (AIR) Sensor 1 Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

N290 - Fuel Metering Valve Locations

N320 - Secondary Air Injection (AIR) Solenoid Valve 2 Locations

N402 - Fuel Metering Valve 2 4.2L Gasoline, BAR Overview

S13 - Fuse (on fuse/relay panel) Locations

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber

T60 - 60-Pin Connector, black, on engine control module (ECM)

T94 - 94-Pin Connector, black, on engine control module (ECM)

(D111) - Connection 9 (in engine compartment wiring harness)

(D113) - Connection 11 (in engine compartment wiring harness)

(D116) - Connection 14 (in engine compartment wiring harness)

(D195) - Connection 1 (5V) (in engine compartment wiring harness)

* - USA, from June 2007

Previous Diagram 3/13 (Tracks 155-168)

Next Diagram 3/15 (Tracks 183-196)