Diagram 3/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Relay, Leak Detection Pump (LDP), Accelerator Pedal Position Sensor, High Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G65 - High Pressure Sensor Components Outside Pass Compartment

G79 - Throttle Position (TP) Sensor Locations

G185 - Accelerator Pedal Position Sensor 2 Locations

J255 - Climatronic Control Module Overview Of Control Modules

J299 - Secondary Air Injection (AIR) Pump Relay Overview Of Relay

J623 - Engine Control Module (ECM) Overview Of Control Modules

J843 - Models Location System Control Module Interface Locations

S2 - Fuse (on fuse/relay panel) Locations

T10d - 10-Pin Connector, blue, connector station electronics box plenum chamber

T10e - 10-Pin Connector, green, connector station electronics box plenum chamber

T12z - 12-Pin Connector, brown, on models location system control module interface

T16d - 16-Pin Connector, black (Connector D), on Climatronic control module

T94 - 94-Pin Connector, black, on engine control module (ECM)

V101 - Secondary Air Injection (AIR) Pump Motor Locations

V144 - Leak Detection Pump (LDP) Locations

(685) - Ground Connection 1 (on right front long member) Ground Locations

(B564) - Connection 31 (in main wiring harness)

* - Models with leak detection pump (LDP)

** - Models with secondary air injection (AIR) pump

*** - Models with special functions interface

# - Through May 2006

## - from June 2006

♦ - Relay and fuse carrier electronics box plenum chamber

Previous Diagram 3/14 (Tracks 169-182)

Next Diagram 3/16 (Tracks 197-210)