Diagram 3/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Camshaft Adjustment Valve 1, Intake Manifold Runner Control (IMRC) Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F265 - Map Controlled Engine Cooling Thermostat 4.2L Gasoline, BAR Overview

J623 - Engine Control Module (ECM) Overview Of Control Modules

N205 - Camshaft Adjustment Valve 1 Locations

N208 - Camshaft Adjustment Valve 2 Locations

N316 - Intake Manifold Runner Control (IMRC) Valve Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

N319 - Camshaft Adjustment Valve 2 (exhaust) 4.2L Gasoline, BAR Overview

N403 - Intake Manifold Runner Control (IMRC) Valve 2 4.2L Gasoline, BAR Overview

S10 - Fuse (on fuse/relay panel) Locations

T3s - 3-Pin Connector, brown, on intake flap motor

T3t - 3-Pin Connector, black, on variable intake manifold runner motor

T6m - 6-Pin Connector, white, connector station electronics box plenum chamber

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber

T14n - 14-Pin Connector, black, in engine compartment, Bank 2

T60 - 60-Pin Connector, black, on engine control module (ECM)

T94 - 94-Pin Connector, black, on engine control module (ECM)

V157 - Intake Flap Motor Locations

V183 - Variable Intake Manifold Runner Motor 4.2L Gasoline, BAR Overview

(D109) - Connection 7 (in engine compartment wiring harness)

(D115) - Connection 13 (in engine compartment wiring harness)

* - Models with auxiliary heater

** - Through May 2008

*** - from June 2008

# - Through May 2006

## - from June 2006

Previous Diagram 3/15 (Tracks 183-196)

Next Diagram 3/17 (Tracks 211-224)