Diagram 3/18 (Tracks 225-238)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Engine Control Module (ECM), Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
F125 - Multi-Function Transmission Range (TR) Switch Locations
G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations
G131 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations
J393 - Comfort System Central Control Module Overview Of Control Modules
J518 - Access/Start Control Module Access/Start Authorization System Component Overview
J623 - Engine Control Module (ECM) Overview Of Control Modules
S15 - Fuse (on fuse/relay panel) Locations
T4r - 4-Pin Connector, black, oxygen sensor (O2S) behind three way catalytic converter (TWC)
T4s - 4-Pin Connector, brown, oxygen sensor (O2S) 2 behind three way catalytic converter (TWC)
T6k - 6-Pin Connector, brown, connector station electronics box plenum chamber
T10c - 10-Pin Connector, pink, connector station electronics box plenum chamber
T10g - 10-Pin Connector, black, on comfort system central control module
T10p - 10-Pin Connector, black, on transmission
T20e - 20-Pin Connector, black, on access/start control module
T94 - 94-Pin Connector, black, on engine control module (ECM)
Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)
Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC)
(B482) - Connection 18 (in main wiring harness)
(D107) - Connection 5 (in engine compartment wiring harness)
* - Phased-in modification
# - Through May 2006
## - from June 2006
Previous Diagram 3/17 (Tracks 211-224)
Next Diagram 3/19 (Tracks 239-252)