Diagram 3/23 (Tracks 295-308)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Pressure Switch, Engine Coolant Level (ECL) Warning Switch, Oil Level Thermal Sensor, Oil Pressure Warning Lamp, Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

F66 - Engine Coolant Level (ECL) Warning Switch

G266 - Oil Level Thermal Sensor Locations

J285 - Instrument Cluster Control Module Overview Of Control Modules

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

K3 - Oil Pressure Warning Lamp

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

SB6 - Fuse 6 (on fuse panel B) Overview Of Fuses

SB7 - Fuse 7 (on fuse panel B) Overview Of Fuses

SB8 - Fuse 8 (on fuse panel B) Overview Of Fuses

T10f - 10-Pin Connector, red, connector station electronics box plenum chamber

T14n - 14-Pin Connector, black, in engine compartment, Bank 2

T20 - 20-Pin Connector, black, on data bus on board diagnostic interface

T26b - 26-Pin Connector, black, on data bus on board diagnostic interface

T32a - 32-Pin Connector, grey, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(45) - Ground Connection (behind instrument panel, center) Ground Locations

(378) - Ground Connection 13 (in main wiring harness)

• - CAN-Bus (data wire)

* - Through May 2008

** - from June 2008

# - Through May 2006

## - from June 2006

♦ - Through May 2007

♦♦ - from June 2007

Previous Diagram 3/22 (Tracks 281-294)