Fuel Pump (FP) Control Module (J538), Vehicles From 11.2006

Fuel Pump (FP) Control Module (J538), Vehicles from 11.2006

Removing

• The FP control module is located on the right side under the rear seat bench, directly under the floor covering.

- Turn the ignition and remove the ignition key.

- Remove right seat frame in 2nd row.

- Remove sill trim strip.

- Press the floor covering to the side and disconnect the connector - 1 -.






- Remove nuts - arrows -.

Installing

• Tightening specification, refer to => [ Fuel Tank with Attachments Overview ] Fuel Tank With Attachments Overview.

Assemble in reverse order of disassembling. Note the following:

- Install sill trim strip.

- Install right seat frame in 2nd row.