Rear Door Window

Rear Door Window

• Before removing door window, side protective cushion must first be removed.






1 Door Window

- Remove the remove the rear window guide. Refer to => [ (Item 7) Window Guide ] Service and Repair.

- To remove, release catches - arrow - from coupling plate - 2 - with a screwdriver and pull window - 1 - in window guide up slightly.

- Tip window forward and remove it upward from door.

2 Window Regulator

• The window regulator is installed inside the door. Refer to => [ Rear Door Window and Regulator Overview ] Service and Repair.

Door Window, Releasing






- Run door window down.

- Using a screwdriver, press coupling plate - 3 - outward to release through cut-out in window guide - 1 - and hole in door window - 2 -.

- Remove window upward from coupling plate.

Door Window, Inserting






- Insert door window - 1 - diagonally toward back in door window guide.

- Align window in front and rear window guides and slide it down.

- Press window down into window regulator coupling plate.

- This engages coupling plate in window.

Side Protective Cushion, Replacing






- Cut through side protective cushion in area - arrow - with a knife.

- Remove upper part from door.

- Loosen lower part by from door panel using turning motions and remove.

• Before installing a new side protective cushion, door window must first be installed.

- To install a new side protective cushion, first remove protective paper - 2 -, insert as shown and press firmly onto door panel.