Backrest End Switch Assembly Overview

Backrest End Switch Assembly Overview





1 Backrest Frame

2 Housing

• For the backrest stop switch

CAUTION!
The housing with the actuator - 4 - must not be separated from the shaft - 3 - because the end positions cannot be found again.

3 Shaft

CAUTION!
Do not remove shaft from housing with adjusting element.

4 Actuator

• For the backrest stop switch

• Must not be removed from the shaft - 3 -

CAUTION!
The housing with actuator must not be separated from the shaft - 3 - because the end positions cannot be found again.

5 Backrest Stop Switch

• Driver backrest stop switch (E69)

• Front passenger backrest stop switch (E70)

• Removing and installing, refer to => [ Backrest End Switch ] Power Seats