Cylinder Head Assembly: Specifications

Cylinder Head Bolts





Replace bolts
First pass Hand tight
Second pass 30 Nm
Third pass 60 Nm
Fourth pass Tighten an additional 90°
Fifth pass Tighten an additional 90°
Sixth pass: Bolts with arrows 8 Nm
Final pass: Bolts with arrows Tighten an additional 90°

Cylinder Head Distortion





Maximum permissible distortion 0.1 mm

Reworking Dimension





Minimum dimension - a - 139.5 mm

Camshaft Bearing Guide Frame Bolts





First pass Hand tight
Final pass 8 Nm

Intake Manifold Tightening Sequence Specifications

Exhaust Manifold Nuts Specifications

Camshaft Adjuster Bolts Camshaft Timing Chains Assembly Overview