Engine-Transmission Assembly, Placing on the Scissor Lift Table

Engine-Transmission Assembly, Placing on the Scissor Lift Table

Special tools, testers and auxiliary items required

• Scissor Lift Table (VAS 6131 A) with Support Set (VAS 6131/10) and Supplementary Set (VAS 6131/11), (VAS 6131/12) and (VAS 6131/13)





Prepare scissor lift platform:

- Equip the Scissor Lift Table (VAS 6131 A) with the Support Set (VAS 6131/10) and Supplementary Set (VAS 6131/11), (VAS 6131/12) and (VAS 6131/13) as follows:









- Next secure mounting elements to scissor lift table by hand.

- Position the Scissor Lift Table (VAS 6131 A) horizontally.

• Note bubble level (sight glass) on support platform.

- Use the Workshop Crane (VAS 6100) to move the engine/transmission subassembly to the Scissor Lift Platform (VAS 6131 A).

- Position the engine/transmission subassembly onto the support elements from the (VAS 6131/10) and (VAS 6131/13)as illustrated.





- Position the engine/transmission subassembly and the left and right transmission supports onto the support elements from the (VAS 6131/11) and (VAS 6131/12) as illustrated.





- Turn the mounting element spindles up until the engine-transmission assembly is horizontal on the Scissor Lift Table (VAS 6131 A).

- Attach mounting element base plates to Scissor Lift Table (VAS 6131 A) and tighten to 20 Nm.