Instrument Panel, Gauges and Warning Indicators: Testing and Inspection

Service Display, Resetting or Adapting

=> [ Service Interval Display through MY 2008 ]

=> [ Service Interval Display from MY 2009 ]

=> [ Maximum Values, Adapting ]

=> [ Service Display, Resetting after Service without VAS 5051/5052 ]

Service Interval Display through MY 2008

- Follow these steps in sequential order.

• Connect VAS 5051/5052.





• Guided Fault Finding or Guided Functions

• Go to - function/component selection

• Service Work

• Combination Processor, reset WIV.

• Follow the guided program.

• Follow the guided programs function description.

• WIV = Wartungsintervall - Verlangerung (Maintenance Interval Extension)

Service Interval Display from MY 2009

• From MY 2009, all vehicles follow the new maintenance concept as with the Audi A5.

- Follow these steps in sequential order.

• Connect VAS 5051/5052.





• Guided Functions

• Service Work

• Follow the guided program.

Maximum Values, Adapting

- Follow these steps in sequential order.

• Connect VAS 5051/5052.





• Guided Fault Finding or Guided Functions

• Go to - function/component selection

• Service Work

• Combination Processor, adjusting maximum WIV value.

• Follow the guided program.

• WIV = Wartungsintervall - Verlangerung (Maintenance Interval Extension)

• Follow the guided programs function description.

Service Display, Resetting after Service without VAS 5051/5052

• If the service display is reset manually via the instrument cluster, it automatically sets itself to fixed interval.

- Switch the ignition on.





- With button 1 pressed, the message "SERVICE" appears.

- Press button again within 5 seconds until the message "SERVICE IN.. KM.. DAYS" appears.

- Service has been reset.