Garage Door Opener Control Module

Garage Door Opener Control Module

Removing





- Remove front bumper cover.

- Disconnect electrical connector - 1 -.

- Remove the bolts - arrows -.

- Remove the bracket with the garage door opener control module (J530) - item 2 - on the bumper.

- Remove the bolts - arrows -.





- Remove the bracket - 1 - from the garage door opener control module - item 2 -.

Installing

• Tightening specification, refer to => [ Roof Trim Lights and Switches Assembly Overview ] Roof Trim Lights and Switches Assembly Overview.

Install in reverse order of removal, observing the following:

- Install front bumper cover.