Right Rear Relay and Fuse Panel

Right Rear Relay and Fuse Panel

Removing





- With ignition switched off, disconnect battery ground wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the end panel trim panel.

- Remove the bolts - arrows -.

- Remove the frame base mount behind the crossbrace.

- Remove screws - 1 - and - 3 -.





- Remove the right rear relay and fuse panel - 4 - on the frame - 2 -.

Installing

• Tightening specification, refer to => [ Rear Relay Carrier and Fuse Panel Assembly Overview ] Rear Relay Carrier and Fuse Panel Assembly Overview.

Install in reverse order of removal, observing the following:

- Install the end panel trim panel.

- Connect battery. Required actions => [ Connecting ] Battery, Disconnecting and Connecting.