Windshield Wiper Motor with Windshield Wiper Motor Control Module

Windshield Wiper Motor with Windshield Wiper Motor Control Module

General information

The front windshield wiper system consists of two mechanically independent systems. Each wiper arm is operated by a separate motor. The wiper motor control modules ensure the wipers move together.

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing

- Remove the left wiper arm. Refer to => [ Windshield Wiper Arms ] Service and Repair.

- Remove the left front wheel housing liner.

- Remove the bolts - arrows -.





- Disconnect electrical connector - 2 -.

- Remove the windshield wiper frames - 1 - with the linkage and wiper motor on the rear of the wheel housing.

Installing

• Tightening specification, refer to => [ Windshield Washer System Assembly Overview ] Windshield Washer System Assembly Overview.

Install in reverse order of removal, observing the following:

- Insert wiper motor with wiper frame into vehicle.

- Tighten the bolts.

- Install the left front wheel housing liner.

- Adjust wiper arms. Refer to => [ Windshield Wiper Arms, Adjusting ] Adjustments.