Flush-Bonded Windows

Flush-Bonded Windows





Minimum curing times

CAUTION!
• For safety reasons, use only electrically non-conductive 2C-adhesive when installing windshield and rear window using the materials listed below.

• The vehicle can only be used after the minimum curing time has elapsed.





Cleaning when soiled by adhesive sealing material

Adhesive removal solution (D 002 000 10) is the recommended cleaning solution. Observe safety precautions when processing.

CAUTION!
When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint surfaces

- First, clean paint surfaces with a dry cloth. Remove further material using adhesive removal solution (D 002 000 10).

Plastic trim

- Allow the adhesive sealing material to harden (about 1 hour) and then peel it off.