Door Window

Door Window

Removing





Proceed as follows:

- Remove the door trim.

- Remove the door seal and front interior window seal retaining knobs from the door shell => [ Door Seal and Inner Window Shaft Strip ] Door Seal and Inner Window Shaft Strip.

- Remove the front sealing plugs - 5 -.

- Remove the door shell cover - 2 - => [ Door Shell Cover ] .

- Run the door window down until the bolts in the opening are visible.

- Remove the bolts - 1 - and - 4 -.

• The bolts must be removed completely to remove the door window.

- Remove the door window - 3 - upward out of the clamping bracket and remove it from the door - arrow -.

Installing

• Gap dimensions => [ Door Window Gap Dimensions ] .

• Tightening specifications => [ Window Regulator Motor and Window Regulator Assembly Overview ] Window Regulator Motor and Window Regulator Assembly Overview.

Installation is reverse of removal, but note the following:

- Insert the door window diagonally forward in the door window guide.

- Align the door window in the front window guide and slide it down.

- Press the door window down into the coupling plate.

- Tighten the bolts.

- Adjust the door window => [ Door Window Side Dimensions, Adjusting ] Door Window Side Dimensions, Adjusting.