Power Seat Control Module: Service and Repair

Control Unit, Removing and Installing

NOTE:
- The control unit for the memory seat and the electric seat is under the drivers seat.
- If the control unit is defective, the top support of the seat pan and backrest must be removed.







- Remove seat.
- Remove bolts - 2 - (2x). Tightening torque 1.5 Nm
- Turn control unit - 1 - over.







- Disengage retaining clip - 4 - and disconnect connector - 5 -.
- Press retainer tabs - 3 - (2x) and disconnect connector - 2 -.
- Remove control unit - 1 -.

Installing

- Installation is in reverse order of removal.