Fog Lamp Housing, Audi RS4

Fog Lamp Housing, Audi RS4

Removing

- Turn light switch to position "0".

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

Removing

- Pull off air inlet grille in lower section of bumper cover - arrows -.





- Remove screws - arrows -.





- Disengage housing and remove from opening.

- Disconnect electrical connection.

Installing

Install in reverse order of removal, noting the following:

- First engage fog lamp housing on inner side of bumper cover.

- Check and adjust fog lamps if necessary =>.

Tightening Specifications