Diagram 116/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Intake Air Temperature (IAT) Sensor, Mass Air Flow (MAF) Sensor, Coolant Circulation Pump Relay, Coolant Fan Control (FC) Control Modules, Camshaft Adjustment Valves





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G42 - Intake Air Temperature (IAT) Sensor Locations

G70 - Mass Air Flow (MAF) Sensor Locations

J151 - Coolant Circulation Pump Relay Locations

J293 - Coolant Fan Control (FC) Control Module Common Modules Overview

J623 - Engine Control Module (ECM) Locations

J671 - Coolant Fan Control (FC) Control Module 2 Locations

N205 - Camshaft Adjustment Valve 1 Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

S344 - Engine Electronics Fuse 2 Locations

T4y - 4-Pin Connector, black, engine compartment

T6n - 6-Pin Connector, on Coolant FC (Fan Control) Control Module 2

T6o - 6-Pin Connector, on Coolant FC (Fan Control) Control Module

T10d - 10-Pin Connector, grey, connector station A-pillar, left Connector Station

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber Connector Station

T17j - 17-Pin Connector, brown, connector station E-box, plenum chamber Connector Station

T60 - 60-Pin Connector, black

T94 - 94-Pin Connector, black

V51 - After-Run Coolant Pump Locations

(D107) - Connection 5 (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

* - with Coolant Fan Control (FC) Control Module 2 only

Previous Diagram 116/11 (Tracks 127-140)

Next Diagram 116/13 (Tracks 155-168)