Air Injection: Locations

Secondary Air Injection (AIR), Component Overview







1 - Secondary Air Injection (AIR) Pump Motor V101
- At right front in engine compartment below long member
2 - Air guide pipe
- To air filter housing
3 - Bracket
- For Secondary Air Injection (AIR) Solenoid Valve N112
4 - Secondary air injection (AIR) solenoid valve N112
- Component location
5 - Right combination valve for Secondary Air Injection (AIR)
- Component location: Back of right cylinder head
6 - Air guide hose
- From Secondary Air Injection (AIR) Pump Motor V101 to combination valves
7 - Left combination valve for Secondary Air Injection (AIR)
- Component location: Back of left cylinder head
8 - Gasket
- Replace
9 - 9 Nm
10 - 9 Nm
11 - Connecting pipe
- To cylinder head
12 - 9 Nm
13 - Gasket
- Replace
14 - 9 Nm
15 - Air guide pipe
- To combination valves
16 - Bracket
- For Secondary Air Injection (AIR) pump motor V101
17 - 9 Nm







Component location for Secondary Air Injection (AIR) Pump Relay J299
- In E-box, plenum chamber.
4 - Secondary Air Injection (AIR) Pump Relay J299

NOTE: The Secondary Air Injection (AIR) Pump Fuse S130 is located on a separate bracket.







Installation location of Secondary Air Injection (AIR) Solenoid Valve N112
- Under intake manifold
1. Vacuum line from intake manifold
2. Secondary air injection (AIR) solenoid valve N112
3. Vacuum line to Secondary Air Injection (AIR) combi-valves