Telematics Function Selector Switch II

Telematics Function Selector Switch II

- Turn off all electrical consumers.

- Remove ignition key.

Removing

- Pull up parking brake lever.

- Unclip the cover - 2 - under the parking brake lever at the retaining springs - 1 -.





- Grasp in the opening under the parking brake lever and push the switch unit out of the center console - arrows -.





- Disconnect the connectors - 3 - through - 6 -.





- Carefully release catches - arrows - using a small screwdriver.

- Remove the Function Selector Switch 2 (E272) - 1 - from the switch unit - 2 -.

Installing

- Install in reverse order.