Connector Locations

iPod Baseplate

• Unlisted connector terminals are not assigned.

Black 12-pin multi-pin harness connector (T12a)





1 Data out to Radio (R)/Operating Electronics, Navigation Control Module ( J402)/Radio/Navigation Display Control Module ( J503)
2 CLK out to Radio (R)/Operating Electronics, Navigation Control Module ( J402)/Radio/Navigation Display Control Module ( J503)
3 Terminal 31
4 Data in from Radio (R)/Operating Electronics, Navigation Control Module ( J402)/Radio/Navigation Display Control Module ( J503)
6 Permanent positive from Radio (R)/Operating Electronics, Navigation Control Module (J402)/Radio/Navigation Display Control Module (J503)
7 Right signal to Radio (R )/Operating Electronics, Navigation Control Module (J402)/Radio/Navigation Display Control Module (J503)
8 Positive switched from Radio (R)/Operating Electronics, Navigation Control Module (J402)/Radio/Navigation Display Control Module (J503)
9 Signal ground from Radio ( R)/Operating Electronics, Navigation Control Module (J402)/Radio/Navigation Display Control Module (J503)
10 Left signal to Radio (R )/Operating Electronics, Navigation Control Module (J402)/Radio/Navigation Display Control Module (J503)
11 TOC Check Control (not used)
12 Terminal 58 (not used)