Glove Compartment Cover Brake, Removing and Installing

Glove Compartment Cover Brake, Removing and Installing

Special tools, testers and auxiliary items required







- Special hook 3370

NOTE:
- There are 2 versions of the glove compartment cover brake. Both versions are described in the following. Determine which version the vehicle has and performed the corresponding activities.
- Version 1
- Version 2

Version 1

Removing

- Remove glove compartment.







- Press pin - 1 - out in direction of arrow at connection between brake for glove compartment cover - 2 - and glove compartment cover - 3 -.
- Loosen green connector.







- Rotate brake for glove compartment cover - 1 - approx. 90 degree in opening - 2 - and remove brake for glove compartment cover.

Installing

- Installation is reverse of removal.

Version 2

Removing

- Open glove compartment.







- Pull off right cover on instrument panel - arrow - using special tool 3370.







- Disconnect electrical connector - 2 -.
- Remove joint pin 1 - 1 -.
- Disengage the brake for glove compartment cover - 3 - in a clockwise direction and remove it.

NOTE: Depicted in illustration with glove compartment removed.

Installing

- Installation is reverse of removal.