Diagram 128/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Brake Light Switch, Accelerator Pedal Position Sensor, Throttle Valve Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch ABS/Electronic Stabilization Program Overview

F36 - Clutch Pedal Switch Manual Transmission

F47 - Brake Pedal Switch ABS/Electronic Stabilization Program Overview

G79 - Throttle Position (TP) Sensor Accelerator Pedal Module

G185 - Accelerator Pedal Position Sensor 2 Accelerator Pedal Module

G186 - Throttle Drive (for Electronic Power Control (EPC))

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC)

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)

J338 - Throttle Valve Control Module Locations

J623 - Engine Control Module (ECM) Locations

T17d - 17-Pin Connector, red, connector station electronics box, plenum chamber

T17e - 17-Pin Connector, white, connector station electronics box, plenum chamber

T17j - 17-Pin Connector, brown, connector station electronics box, plenum chamber

T60 - 60-Pin Connector, black

T94 - 94-Pin Connector, black

(A18) - Connection (54) (in instrument panel wiring harness)

(A99) - Connection 1 (87) (in instrument panel wiring harness)

(D51) - Plus Connection 1 (15) (in engine compartment wiring harness)

* - => Applicable Current flow diagram for anti-lock brake system (ABS)

Previous Diagram 128/7 (Tracks 71-84)

Next Diagram 128/9 (Tracks 99-112)