General Specifications

Cylinder Head





Tighten cylinder head bolts in 4 stages in tightening sequence - 1 to 10 - as follows:

Torque wrench 30 Nm

Torque wrench 60 Nm

Torx key 90 degrees (1/4 turn)

Torx key + 90 degrees (1/4 turn)

There is no requirement to retighten the cylinder head bolts after repairs.

Torque bolts -arrows- with locking compound 8 Nm

Rigid wrench bolts -arrows- + 90 degrees (1/4 turn)

Always replace bolts that are tightened to torque.

Camshaft Bearing Bracket





Hand-tighten guide frame bolts equally, in sequence - 1 to 24 -.

Torque specifications





Main Bearing Guide





Replace bolts - 1 to 20 -.

Tighten bolts for guide frame as follows:

Torque wrench bolts - 1 to 10 - 30 Nm

Torque wrench bolts - 11 to 20 - 20 Nm

Torque wrench bolts - 1 to 10 - 50 Nm

Torque wrench bolts - 11 to 20 - 30 Nm

Rigid wrench bolts - 1 to 10 - + 90 degrees (1/4 turn)

Rigid wrench bolts - 11 to 20 - + 90 degrees (1/4 turn)

Tighten bolts 9 Nm. in a diagonal sequence
(highlighted in illustration but not numbered)

Rod Bearing Cap

Torque 40 Nm + 90 degrees (1/4 turn)

Vibration Damper/Crankshaft Pulley





Tighten vibration damper bolts - arrow - diagonally in 3 stages.

Torque wrench 15 Nm.

Torque wrench 22 Nm.

Torx key + 90 degrees (1/4 turn).

Dual-Mass Flywheel

Torque specification





Oil Pump

Torque specifications





Coolant Pump

Torque specifications