Headlamps With High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, Assembly

Headlamps With High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, Assembly

NOTE:
- After performing any repairs or service that could affect headlight aim, check/adjust aim.
- Headlamp without adaptive light function (cornering lights) is illustrated.







1 - Screw -1.5 Nm
2 - High intensity gas discharge (HID) lamp control module
- Left High-intensity Gas Discharge (HID) Lamp Control Module J343
- Right High-intensity Gas Discharge (HID) Lamp Control Module J344
3 - Headlamp housing
4 - Screw - 4.5 Nm
5 - Housing cover
- For parking/daytime running lamps
6 - Daytime running lamp (DRL) bulb
- 12V,21 W
- Replacing
7 - Bulb holder
- For daytime running lamp (DRL) bulb
8 - Bulb holder
- For parking lamps
9 - Left Parking Lamp M1, Right Parking Lamp M3 - bulb
- 12V,5W
- Replacing
10 - Screw-4.5 Nm
11 - Housing cover
- For low beam headlamps
12 - -Screw-1.5 Nm
13 - High intensity gas discharge (HID) lamp
- 35W, D1S
- Replacing
14 - Bulb holder
- For turn signal bulb
15 - Left Front Turn Signal Lamp M5, Right Front Turn Signal Lamp M7 - bulb
- 12V,21 W
- Orange
- Replacing.
16 - Trim cover.