Diagram 128/24 (Tracks 309-322)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Pressure Switch, Engine Coolant Level (ECL) Warning Switch, Fuel Level Sensor, Oil Level Thermal Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

F66 - Engine Coolant Level (ECL) Warning Switch Locations

G - Fuel Level Sensor Fuel Pump and Sensors

G6 - Transfer Fuel Pump (FP) Fuel Pump and Sensors

G169 - Fuel Level Sensor 2 Fuel Pump and Sensors

G266 - Oil Level Thermal Sensor Locations

J285 - Instrument Cluster Control Module

K2 - Generator (GEN) Warning Lamp

T14b - 14-Pin Connector, black, in engine compartment

T17d - 17-Pin Connector, red, connector station electronics box, plenum chamber

T17e - 17-Pin Connector, white, connector station electronics box, plenum chamber

T32 - 32-Pin Connector, blue, on instrument cluster

T32a - 32-Pin Connector, green, on instrument cluster

(269) - Sensor Ground Connection 1 (in instrument panel wiring harness)

(A17) - Connection (61) (in instrument panel wiring harness)

(A74) - Connection (15a, Fuse 5) (in instrument panel wiring harness)

(A175) - Connection (58s) (in instrument panel wiring harness)

* - Signal ground output

Previous Diagram 128/23 (Tracks 295-308)