Diagram 98/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Motronic Engine Control Module (ECM) Power Supply Relay, Coolant Fan Control (FC) Control Module 2, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J271 - Motronic Engine Control Module (ECM) Power Supply Relay Locations

J623 - Engine Control Module (ECM) Locations

J671 - Coolant Fan Control (FC) Control Module 2 Locations

S4 - Fuse (on fuse/relay panel)

S42 - Coolant Fan Fuse

S88 - Fuse Strip

T2o - Double Connector, on Coolant FC (Fan Control) Control Module 2

T6n - 6-Pin Connector, on Coolant FC (Fan Control) Control Module 2

T10d - 10-Pin Connector, grey, connector station A-pillar, left Connector Station

T17j - 17-Pin Connector, brown, connector station E-box, plenum chamber Connector Station

T121 - 121-Pin Connector, black

V177 - Coolant Fan 2 Locations

V284 - Coolant Fan 3

(11) - Ground Connection (in battery box) Ground Locations

(26) - Ground Connection (on front apron) Ground Locations

(500) - Threaded Connection 1 - terminal 30 (on relay panel)

(D50) - Plus Connection (30) (in engine compartment wiring harness)

(D101) - Connection 1 (in engine compartment wiring harness)

* - Suction Fan, 300 W

** - Coolant Fan, 100 W, hot climates only

*** - with Coolant Fan Control (FC) Control Module 2 only

Next Diagram 98/3 (Tracks 15-28)