Central Air Door Motor

Central Air Door Motor

Removing

- Remove glove box.

- Disconnect connector - A -.





- Remove bolts - B -.

- Remove the central air flap motor (V70).

Installing

• The cam plate on the control motor is color-coded. In the central air flap motor (V70) it is white (black in vehicles with steering on the right).

- Insert the two pins - A - and - B - into groove - C - of the cam plate





Reinstall all removed components in the opposite sequence while observing the following:

- Install the wiring harness so that it cannot come in contact with any moving parts (e.g. the lever of the control motor).

- Query the DTC memory. Refer to => [ DTC Memory, Interrogating ] DTC Memory, Interrogating and erase the DTC memory. Perform the basic setting => [ Basic Setting ] Basic Setting.

• The function of the control motor can be checked for example: Connect both terminals "5" and "6" in control motor connector to 12 V (DC), the motor moves in one direction until stop, the direction of rotation changes by interchanging B+ and Ground. Use an adapter cable for this. Refer to => [ Preparing Adapter Cables for Control Motor Actuation ] A/C System Control and Regulation Components.