Diagram 99/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Safety Belt Switches, Rear Safety Belt Tensioner Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch

G128 - Front Passenger's Seat Occupied Sensor Passive Occupant Detection System Overview

J234 - Airbag Control Module Common Modules Overview

N196 - Rear Safety Belt (driver's side) Tensioner Igniter Locations

N197 - Rear Safety Belt (front passenger's side) Tensioner Igniter Locations

T2aa - 2-Pin Connector, yellow, on Rear Safety Belt (driver's side) Tensioner Igniter

T2ab - 2-Pin Connector, yellow, Rear Safety Belt (front passenger's side) Tensioner Igniter

T8b - 8-Pin Connector, black, seat wiring connector station, driver seat Connector Station

T8c - 8-Pin Connector, black, seat wiring connector station, passenger seat Connector Station

(109) - Ground Connection (in airbag wiring harness)

(412) - Ground Connection 3 (in seat adjustment wiring harness)

* - with Seat Occupied Recognition Pressure Sensor (without Bladder)

** - with Rear Safety Belt Tensioner Igniter only

*** - with Bladder only

**** - applicable US/CDN

***** - not applicable US/CDN

Previous Diagram 99/6 (Tracks 57-70)

Next Diagram 99/8 (Tracks 85-98)