Seat Angle Adjustment Motor
Seat Angle Adjustment Motor
Special tools, testers and auxiliary items required
• Torque Wrench (V.A.G 1410)
• Engine and transmission holder (VAS 6095)
• Fixture for seat repair (VAS 6136)
1 Motor for Seat Inclination Adjustment
• Removing
- Remove seat. Refer to => [ Power Front Memory Seat ] Power Front Memory Seat.
- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
- Attach the front seat to the fixture for seat repair (VAS 6136).
- Remove bolts - 2 - (Qty. 4).
- Remove screw - 3 -.
- Remove connector - 4 -.
- Remove motor for seat tilt adjustment - 1 -.
• Installing
To install, perform the steps used in removal in reverse order.
2 Bolt
• 12 Nm
• Quantity: 4
3 Bolt
• 20 Nm
• replace
• Threaded holes for screws must always be cleaned (for example, with thread cutter)
4 Connector
Drawer, through June 2006
Special tools, testers and auxiliary items required
• Engine and transmission holder (VAS 6095)
• Fixture for seat repair (VAS 6136)
1 Drawer
• Removing
- Remove seat. Refer to => [ Power Front Memory Seat ] Power Front Memory Seat.
- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
- Attach the front seat to the fixture for seat repair (VAS 6136).
- Pull handle - 2 - and pull out drawer - 1 -.
- Insert a screwdriver with inserted bit into opening - 5 - and remove the bolt installed beneath.
- Remove bolts - 4 - (Qty. 2).
- Remove bolts - 3 - (Qty. 2).
- Remove drawer - 1 -.
• Installing
- To install, perform the steps used in removal in reverse order.
2 Handle
3 Bolt
• 3.5 Nm
• Quantity: 2
4 Bolt
• 3.5 Nm
• Quantity: 2
5 Opening