Center Armrest Rear Trim, Removing and Installing

Center Armrest Rear Trim, Removing and Installing

Special tools, testers and auxiliary items required







- Trim removal wedge 3409







Removing

- Remove the center armrest - 1 -.
- Place the center armrest so it is in the same position as when it is folded up in the vehicle. Slide the trim removal wedge 3409 back between the trim - 2 - and the section of the upholstery that faces down and unclip the trim.

NOTE: The trim - 2 - is slotted on one side.

- Remove the trim - 2 - from the side is that is NOT slotted.

Installing

- Installation is reverse of removal.