Drive Belt: Locations

Ribbed belt drive for generator, component overview





1 - 22 Nm

2 - 22 Nm

3 - Ribbed belt tensioner

4 - 22 Nm

5 - Generator

6 - M8 - 22 Nm; M10 - 46 Nm

7 - Alignment bushing

^ For generator bracket
^ 2 pieces

8 - Generator bracket

9 - 10 Nm

10 - Idler roller holder

11 - Vibration damper

12 - 22 Nm plus an additional 45 degrees (1/8 turn)

^ Replace

13 - Idler roller for ribbed belt

14 - 22 Nm

15 - Cover cap

16 - Ribbed belt

^ Check for wear
^ Do not kink
^ Before removing, mark direction of rotation using chalk or felt-tip marker. Reversing direction of rotation of a run-in belt can destroy the belt
^ When installing ribbed belt, make sure it is seated correctly on pulleys

17 - Threaded bushing