Front Suspension

Stabilizer Bar

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)

Removing

- Remove noise insulation.

- Remove bolt - 2 -.





- Remove hex nut - 2 -.





- Remove stabilizer bar.

Installing

• If you replace stabilizer, note chassis version.

• Stabilizer and mounting must be free of grease.

- Install new nuts - 2 - but do not tighten.





- Tighten new bolt - 2 -.





- Tighten nuts - 2 - to 25 Nm.





- Install noise insulation