Lower Rear Lid Trim, Removing and Installing

Lower Rear Lid Trim, Removing and Installing

Special tools, testers and auxiliary items required

• Special hook (3370)









1 Luggage Compartment Light

• Removing and installing => Wiper and Washer Systems Wiper and Washer Systems

2 Screws (Qty. 4)

• Tightening specification 1.5 Nm

3 Lower rear lid trim

• Removal:

- Open warning triangle cover and remove triangle.

- Remove screws - 2 - (Qty. 4).

- Disengage locking mechanism on left and right at top of trim using special hook (3370) => [ Lower trim, disengaging from retainer ].

- Carefully remove spring clips - 4 - for lower trim on left and right from rear lid.

- Reach between trim and rear lid and disengage four more spring clips - 4 -.

- Remove trim.

• Installing:

To install, perform the steps used in removal in reverse order. Observe the following when doing so:

- Make sure that the trim engages into plate on lid lock.

CAUTION!
Ensure trim is held securely.

4 Spring clips (Qty. 6)

Lower trim, disengaging from retainer





- Disengage locking mechanism on left and right at top of trim using special hook (3370) - arrow -.