VAS 5051 Connecting and Selecting Functions

VAS 5051 Connecting and Selecting Functions

Special tools, testers and auxiliary items required

• Vehicle diagnostic, testing and information system. (VAS 5051)

• Diagnostic lead (VAS 5051/1) or (VAS 5051/3 )

CAUTION!
• Testers and measuring instruments are always to be placed on the rear seat during a test drive.

• These devices may be operated only by a passenger during a test drive.

- Connect the diagnostic lead connector (VAS 5051/1) or (VAS 5051/3) to the Data Link Connector (DLC).





- Switch on the tester - arrow -.





The tester is operational when it displays a picture of a car.

- Switch on the ignition.

- Touch Guided Fault Finding button on the display screen.

- Select the following:

• Make

• Model

• Model year

• Version

• Engine code letters

- Confirm the entered data.

Wait until the tester has interrogated all the control modules in the vehicle.

- Press the Go to button and select "Function/component selection".

- Select "Suspension" on the display.

- Select "Brake system" on the display.

- Select "01 - On Board Diagnostic Capable System".

- Select "Anti-lock brake system" on the display.

- Select "Function" on the display.

Now, all possible functions of Anti-lock Brake System (ABS) installed on the vehicle are displayed.

- Select the desired function on the display.