Diagram 89/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Solenoid Valve, Intake Manifold Change-Over Valve, Cylinder Fuel Injectors, Electro-Hydraulic Engine Mount Solenoid Valves





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J293 - Coolant FC (Fan Control) Control Module

J623 - Engine Control Module (ECM) Locations

J671 - Coolant FC (Fan Control) Control Module 2 Locations

S282 - Engine Electronics Fuse

N85 - Cylinder 7 Fuel Injector Locations

N86 - Cylinder 8 Fuel Injector Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Exhaust System

N144 - Left Electro-Hydraulic Engine Mount Solenoid Valve Locations

N145 - Right Electro-Hydraulic Engine Mount Solenoid Valve Locations

N156 - Intake Manifold Change-Over Valve Locations

T4y - 4-Pin Connector, black, engine compartment

T6n - 6-Pin Connector, on Coolant FC (Fan Control) Control Module 2

T6o - 6-Pin Connector, on Coolant FC (Fan Control) Control Module

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

T17j - 17-Pin Connector, brown, connector station E-box, plenum chamber

T121 - 121-Pin Connector, black

(D95) - wire connection (injectors), in engine compartment wiring harness

(D172) - Engine Electronics Connection (in engine compartment wiring harness)

Previous Diagram 89/5 (Tracks 43-56)

Next Diagram 89/7 (Tracks 71-84)